2/13/2023 0 Comments Cisco asa asdm screen issueIt is important that you check that there is enough free space in flash memory to accomodate the new image files that you want to upload before doing so. This will show you the current contents of your flash memory and also the amount of free space. The show bootvar command will also show you which software image file the device is using. At the prompt type:Īt this stage you can use the show version command to show the current running ASA software version. ASDM 7.6 should work with ASA version 9.1(7)12, I had installed it on ASA 5510 with 9.1(7)9 and it worked with no issues.įirstly telnet or ssh in to your ASA device, in this example I am using an ASA 5505 with a security plus license installed. The + sign next to the ASDM version stands for on. Depends on what version is running on the ASA, a corresponding minimum ASDM version could be installed. After investigating the logs on the ASA and using the Troubleshooting VPN component on the Azure Virtual Network Gateway, I discovered I needed to enable IKE v2 on our ASA outside interface and create an IKEv2. When setting up through ASDM, I also ran into the issue that the connection was not established / the VTI interface stayed down down. If you have a new ASA and would like to upgrade the ASA and ASDM image before configuration, here’s a quick walkthrough of how to do just that using the command-line interface (CLI).
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
May 2023
Categories |